UPS
Model		IMP-425A/AP	IMP-525A/AP	IMP-625A/AP	IMP-825A/AP	IMP-1000A/AP
		IMD-425A/AP	IMD-525A/AP	IMD-625A/AP	IMD-825A/AP	IMD-1000A/AP
Capacity(VA)		425 VA	525 VA	625 VA	825 VA	1000 VA
Capacity(Watts)		255 W	315 W	375 W	495 W	550 W
Form		Tower Type
INPUT
Voltage		100 / 110 / 120 or 220 / 230 / 240 Vac
Voltage Range		75 - 150 or 165 - 300 Vac
Frequency Range		50 / 60 Hz (Auto Sensing)
OUTPUT
Waveform		Simulated Sine Wave
Voltage		100 / 110 / 120 or 220 / 230 / 240 Vac
Frequency		50 / 60 Hz ± 0.5 Hz
Transfer Time		2 -4 ms(Typical)
PROTECTION
Full Protection		Overload, Surge, Short Circuit
Tele Communication		RJ11 / RJ45 : AP Model
BATTERY
Model		IMP-425A/AP IMD-425A/AP	IMP-525A/AP IMD-525A/AP	IMP-625A/AP IMD-625A/AP	IMP-825A/AP IMD-825A/AP	IMP-1000A/AP IMD-1000A/AP
Type		12V 7.2Ah			12V 9Ah
Quantity		1
Typical Recharge Time		6 - 8 Hr to 90%
MANAGEMENT & COMMUNICATION
Indicator		LED Control Panel, IMP Digital Control Panel, IMD
Communication Port		USB B-type : AP model
PHYSICAL
Dimensions(WxDxH)(mm)		105 x 334 x 168
Weights(Kgs)		6.1		6.3	6.8
Shipping Dimensions(mm)		196 x 410 x 263
Shipping Weights(Kgs)		7.4		7.6	8.1
Alarm
Overload / Fault		Continuous Beeping
Battery Mode		Beep every 2 seconds
Low Battery		Beep every 0.5 seconds
Environment
Operating Humidity		0 - 90 % RH at 0 - 40 °C (Non-condensing)
Audible Noise		Less than 40 dB

* IMD series are same specification with IMP series, but in Digital Indicator

* Specifications are subject to change without further notice

* Specifications are for reference, actual information should be based on real product